Sinexcel DC charger
SEC Distributed Series
One power cabinet up to 1.28 MW, feeding as many as 16 connectors. Power goes where the vehicles are, not where the hardware happens to sit.
Separate the power
from the parking bay.
An all-in-one charger puts the power electronics next to the car, so its capacity is stranded whenever that bay is empty. The distributed series moves the electronics into one cabinet and puts only cables and a screen at the bays. A depot with sixteen connectors draws on the same pool of power.
Full matrix power switching
The cabinet routes its modules to whichever dispensers are in use, so a half-empty depot still charges the vehicles that are plugged in at full rate.
Two trucks at once
A dispenser with two liquid-cooled 500 A connectors charges two heavy vehicles side by side and can hold 1000 kW continuously.
Dispensers to suit the site
Floor-mounted, suspended or pedestal, air cooled or liquid cooled. A pedestal dispenser is 500 × 200 mm and 800 mm tall, small enough to line a row of bays.
The 1280 kW power bank with dispensers either side.
The 480 kW power bank, for up to six connectors.
Specification
A site pairs one power unit with the dispensers it needs.
1280 kW
Largest power unit
16
Connectors from one cabinet
700 A
Boost per connector, liquid cooled
58 W
Standby draw, 1280 kW unit
1280 kW power unit
480 kW power unit
CCS dispenser
Pedestal-mounted dispenser
Standards and compliance
Certified for the European market and open over OCPP, so the chargers report to the back office you choose.